VFI-600 Series Acrylic Wood Recovery Board Coating System
There are times when it is necessary to use plywood, OSB, or other types of recovery boards such as in new construction, over a gravel roof, or to create a slope using tapered insulation. In situations where the roof slope will be greater than 3’/12″ the VFI-600 Series Acrylic Roofing System can be used as a stand-alone roofing system.
The substrate will first be made seamless and water-tight by treating all board seams, perimeters, penetrations, equipment curbs and roof field with VFI-640 Acrylic Gray Base Coat and VFI reinforcing fabric. Then the roof is coated with with VFI-605 Acrylic White Top Coat to protect the base coat and fabric from the effects of the environment. All that is required to rejuvenate the 600 Series Acrylic Roofing System at the end of it’s useful life is to add additional layers of VFI-605 Acrylic White Top Coat.
VFI-605 White Acrylic Top Coat is rated as a cool roof by the Cool Roof Rating Council (CRRC). The result is a substantial reduction in cooling costs compared to traditional roofing.
VFI-600 Series Acrylic Restoration Coating System Includes:
- VFI-605 Premium Grade Elastomeric White Top Coat
- VFI-607 Single Component Acrylic Basecoat/Primer
- VFI-630 Flashing Grade Acrylic Coating
- VFI-640 Premium Grade Elastomeric Gray Base Coat
VFI-600 Series Acrylic Restoration Coating System Advantages
- Extends the useful life of the roof
- Offers high tensile strength and elongation
- Resistant to dirt pick up
- Offers excellent resistance to emended exposure to solar ultraviolet energy
- By decreasing roof surface temperature, VFI-600 Series can reduce energy costs
- Fungal and algal resistant-even in high temperatures
- Low VOC, non-flammable and presents minimal hazard to the applicator or the environment
VFI-10 year 600 series acrylic over wood/recovery board
